Rigid discharge electrode for electrostatic precipitator

Product Description

The corona wire has the advantages of high mechanical strength, not easy to break, easy to clean, low cost, and very simple in
processing and production. It is suitable for use in new electrostatic precipitators or modification of old electrostatic
precipitators.

The corona wire can be installed in various horizontal or vertical electrostatic precipitators. It has good volt-ampere
characteristics, strong adaptability to changes in dust specific resistance, and cut-off voltage that is 20,000 higher than that
of other corona wires. Volts and other strengths. The discharge capacity of the corona wire is related to the overall sharpness
(or curvature) of the corona discharge; when the tip of the corona discharge has dust gathering, the curvature is smaller, which
has a great discharge effect. Impact.

There are many types of corona poles. The more the discharge sharp angle, the better the corona effect. However, the more the
discharge sharp angle, the production and installation are more difficult. The corona wire is generally connected to high voltage
and needs There is a good insulation device, and the interval between the corona wires should be appropriate. The distance is too
far to affect the current of the corona. If the interval is too close, the corona wire may produce shielding phenomenon, which
causes the electric field strength of the corona wire to weaken. The upper and lower parts of the dust collecting electrode are
fixed, and the dust collecting electrode is grounded. Generally, it is required that the dust is easy to settle on the electrode
plate, and the secondary dust generated during rapping is less, and the electrode plat

Products Show